Annual maintenance for a home in Fuerteventura: what to inspect
Sun, wind, dust and salt call for regular checks. Short planned maintenance costs less than intervention after failure.
Where to begin
Inspect roofs, outlets, overflows, sealants and penetrations before and after severe conditions. Wash and check windows, hardware, balustrades and exposed metals, especially near the sea. Across Fuerteventura, sunlight, wind, salt exposure, access and service availability vary considerably. A decision that looks sound in theory can become inefficient on the wrong plot.
Technical decisions
Review cracks, paint, joints and cladding before small defects allow water ingress. Clean solar panels, filters, technical units and grilles according to dust and salt exposure. A useful quotation states what is included, what is excluded and which assumptions have been made. A stand-alone figure without a design or plot assessment is only an early reference.
Budget, timing and checks
Check the pool, pumps, leaks, water levels and surface condition. Review irrigation, emitters, valves and plant health before drier periods. The strongest choice is the one that remains coherent when planning feasibility, architectural quality, future maintenance and the total budget are considered together.
How to reach a robust decision
Test electrical protection, leak detection, locks and security systems. Keep a photographic record of work and products used to support future maintenance. The starting point is not selecting a catalogue solution. It is understanding how the subject relates to the plot, local rules and the way the home will actually be used.
Practical checklist
- Inspect roofs, outlets, overflows, sealants and penetrations before and after severe conditions.
- Wash and check windows, hardware, balustrades and exposed metals, especially near the sea.
- Review cracks, paint, joints and cladding before small defects allow water ingress.
- Clean solar panels, filters, technical units and grilles according to dust and salt exposure.
- Check the pool, pumps, leaks, water levels and surface condition.
- Review irrigation, emitters, valves and plant health before drier periods.
- Test electrical protection, leak detection, locks and security systems.
- Keep a photographic record of work and products used to support future maintenance.
Mistakes to avoid
- Acting only when an element stops working.
- Using aggressive cleaners on metals, glazing and finishes.
- Carrying out maintenance without recording materials and products.
Frequently asked questions
What is the first step?
Inspect roofs, outlets, overflows, sealants and penetrations before and after severe conditions. Wash and check windows, hardware, balustrades and exposed metals, especially near the sea.
What determines cost and timing?
Check the pool, pumps, leaks, water levels and surface condition. Review irrigation, emitters, valves and plant health before drier periods.
Is a technical check needed before deciding?
Test electrical protection, leak detection, locks and security systems. Keep a photographic record of work and products used to support future maintenance. The strongest choice is the one that remains coherent when planning feasibility, architectural quality, future maintenance and the total budget are considered together.
Related guides
Do you have a plot or an idea to assess?
Tell us the area, approximate floor area and finish level you have in mind. We can help organise the initial checks and the design path.
Discuss your project →